B1 | Fixed Mount Installation

The B1 Fixed Mount is designed to be used in situations where it is not feasible for the tripod setup to be used. The fixed mount can either be attached to a flat wall or installed on a pole that ranges from 2-12 inches. All equipment that is needed for the B1 Fixed Mount is included in the kit.

Please note that when installing the fixed mount, proper measurements should be taken on the distance back from home plate as well as the height of the mount in relation to the ground to ensure that the placement of the mount falls within our calibration guidelines.


If you would like to purchase a B1 Fixed Mount, please use this link: https://shop.trackmanbaseball.com/collections/products/products/b1-fixed-mount

The attached PDF document details the installation of the fixed mount. For any installation questions, please contact your sales representative.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request