A paperclip reset can help resolve a range of issues, including when your unit displays a red light. If a reset is required, please follow the steps below.
How To Do A Paperclip Reset On A B1 Unit
- Prepare the B1 Unit
- Power On the B1: Turn on the B1 unit and wait for the light on the front to turn solid green.
- Prepare the Paperclip
- Unravel the Paperclip: While the unit is powering on, take a paperclip and unravel one of its sections.
- Perform the Paperclip Reset
- Access the Reset Button: Once the light on the B1 is solid green, flip the unit upside down.
- Open the grey flap that covers the ethernet port. You will see a small hole next to the ethernet port.
- Insert the Paperclip: Carefully insert the unraveled paperclip into the hole.
- Apply minimal pressure and hold it in place for 15 seconds.
- The light on the front of the unit will flash off, indicating the reset process has started.
- Confirm the Reset
- Restart the Unit: After about 30 seconds, press the power button on the radar
- The light will turn back on and eventually become solid green again.
- Reset Complete: Once the light is solid green again, the paperclip reset is complete.