Please see below the LED status indicators for camera conditions.
Color | Matching Web Message | Meaning |
|---|---|---|
| Off | *No message* | Waiting for the system to become ready. |
| Red / Blue | Storage Unusable, Trying to Save | No usable storage device detected, usually because the storage device is full. The camera is ready to save videos. Try using a different storage device, such as another SD card. |
| Red / White | Storage Unusable, No Genlock | No usable storage device detected, usually because the storage device is full. The receiver camera cannot detect the genlock signal from the source camera. Try a different storage device. |
| Red / Green | Storage Unusable | No usable storage device detected, usually because the storage device is full. The camera is ready to be triggered. Try a different storage device. |
| Red / Magenta | Storage Unusable, Triggered | No usable storage device detected, usually because the storage device is full. The camera has been triggered and is filling the post-trigger buffer. Try a different storage device. |
| Blue / White | Saving No Genlock Signal | Saving captured video to the storage device. The receiver camera cannot detect the genlock signal from the source camera. |
| Blue / Green | Saving, Ready | Saving captured video to the storage device. The camera is ready to be triggered. (Background Save Mode) |
| Blue / Magenta | Saving, Triggered | Saving captured video to the storage device. The camera has been triggered and is filling the post-trigger buffer. (Background Save Mode) |
| Blue Blinking | Saving | Saving captured video to the storage device. |
| White Blinking | No Genlock Signal | The genlock receiver camera cannot detect the genlock signal from the source camera. |
| White / Green | Genlock Configuration Warning | Genlock source and receiver settings are incompatible. The camera is ready to be triggered. |
| White / Magenta | Genlock Configuration Warning | Genlock source and receiver settings are incompatible. The camera has been triggered and is filling the post-trigger buffer. |
| Green Blinking | Pre-trigger Fill, Ready | Filling the pre-trigger buffer. The camera is ready to be triggered. |
| Green / Magenta | Camera Shutter Warning | Shutter failure detected. Videos can still be captured, but image quality may be degraded. |
| Green / Yellow | Camera Memory Warning | DDR3 memory initialization failed. Videos can still be captured, but image quality may be degraded. |
| Green / Cyan | All Capture Buffers Full | Trigger is disabled because all DDR3 capture buffers are full. This occurs in manual save mode. |
| Green | Ready | Pre-trigger buffer filled. New frames are overwriting the oldest data. The camera is ready to be triggered. |
| Magenta Blinking | Triggered | The camera has been triggered and is filling the post-trigger buffer. |
| Cyan | Reviewing | Reviewing previously captured but unsaved videos. Individual frames can be reviewed, and selected regions of captured videos can be saved. |
| Yellow Blinking | Calibrating Camera | Calibrating. |
| White | Attached Accessories | Overrides the current camera LED pattern for 3 seconds to indicate that an accessory, such as a radar device, has been attached. |