Before starting a session, it is important to confirm that the camera is fully set up and ready to record, as this helps prevent connection issues, failed recordings, and missing video—ensuring a smooth and reliable experience.
Key Steps to Verify Camera Readiness
1: Confirm Power and Hardware Status
The camera must be powered on and properly connected.
What to check:
- Ensure the camera is powered on
- Verify that all cables are securely connected
- Check for any hardware warnings or indicator lights
2: Verify Camera Connection
The system must recognize the camera before recording can begin.
What to check:
- Confirm the camera appears in the app or system
- Ensure the correct device or network is selected
- Reconnect if the camera is not detected
3: Check App and System Communication
The app and camera must communicate properly for recording and video display.
What to check:
- Restart the app if needed
- Confirm the correct session or device is selected
- Ensure there are no connection errors
4: Confirm Recording Configuration
Incorrect setup can prevent proper recording.
What to check:
- Verify the camera is in the correct recording mode
- Confirm session settings are properly configured
- Ensure all required setup steps are completed
5: Ensure a Stable Connection
A stable connection is required for continuous recording.
What to check:
- Confirm the network or device connection is stable
- Avoid switching networks during setup
- Test the connection before starting