Update the B1 Firmware Via Web Interface
- Download the firmware you want to force. Download first and save it to a location on the computer that you can easily remember (preferably the Desktop).
- Firmware can be downloaded from Download Center For Trackman B1 Firmware.
- Restart radar by pressing the power button on the bottom for two seconds, wait on minute, then press one more time.
- Connect to the Trackman Web Interface by clicking on any of the relevant links below based on how your Trackman is connected:
- Wi-Fi: http://172.30.20.1/admin-upgrade.html
- Ethernet (TMB1: link found in network properties).
- Alternatively you can follow the first method in this article: How To Connect To Trackman Web Interface.
- Click Login (no password needed)
- Click 'Upgrade'
- Choose the tm-xxxx.bin file (the firmware you saved earlier on the computer)
- Click 'Upgrade'
- The radar will restart several times, this may take a couple of minutes.
- Once the green light next to the camera is solid green, then the firmware should be applied.
- Double check in baseball App to see if the firmware has been applied (may need to connect to internet first, then the radar).